25 Percent HPL PVC Type Steel Perforated Raised Floor SPP-25P manufacturer from China Jiangsu Liangfeng Access Floor CO., LTD.

25 Percent HPL PVC Type Steel Perforated Raised Floor

Place of Origin:

Jiangsu, China (Mainland)


	Add to My Favorites
HiSupplier Escrow	Share \|

Product Detail

Model No.: SPP-25P

HPL/PVC Type Steel Perforated Raised Floor is composed of panels, pedestals, stringers and screws. The stringers and pedestals are vertically adjustab

Detailed Product Description

HPL/PVC Type Steel Perforated Raised Floor is composed of panels, pedestals, stringers and screws. The stringers and pedestals are vertically adjustable and are secured with screws to form the stable bottom bearing. The elevated floors are then inlaid into the grid which is formed when connecting the stringers.

25% HPL/PVC Type Steel Perforated Raised Floor(SPP-25P)

Panel description:

This is the standard perforated air flow panel, composed of two steel sheets welded together and enclosing a grid metal sheet. Both top sheet and bottom sheet are punched with ventilation holes to allow for easy air flow. The perforated raised floor tiles are coated with epoxy powder after have been phosphorated to protect against corrosion. More specifically, the anti-static high pressure laminate (HPL) tiles and PVC tiles are lined with a black conductive vinyl trim serving as the edging. The perforated panel can be equipped with a damper which allows for air volume adjustment if necessary within the range of 0-25%. This panel system is compatible with the HPL/PVC type steel cement infilled panel system.

Damper:

Raised floor ventilation can be installed with the damper, and it will make the air flow volume from 0~25% adjustment.

Performance Selection Chart (Test in accordance with CISCA)

Linkfloor HPL/PVC Type Steel Perforated Panel (SPP-H/P)

Panel Type

Concentrated Load

Concentrated

Ultimate Load

Uniform Load

Impact Load

Rolling Load

10 Passes

10000 Passes

KN/M²

LB/ M²

SPP-25P

3.6

800

10.8

2400

2250

550

124

2.7

600

1.8

400

SPP-30P

6.7

1500

20.1

4500

9000

780

175

5.6

1250

4.5

1000

SPP-40P

5.6

1250

16.8

3750

6750

670

150

4.5

1000

3.6

800

Understructures

If specified any understructure can be provided with electro galvanizing, gold chromatisting, or electrophoretic coating.

Colors: Available in silver, yellow/tan, black.

Bolted stringer system

Flat steel pedestal

The pedestal design utilizes a 75mm square head. The base plate is normally 100mm square and includes provision for the use of mechanical fixing to the sub-floor or adhesive. The pedestal head design allows for the use of bolt-on stringers if required. All components are free of electro-zinc, a potential source of zinc whiskers.

Pedestal Height: 80mm -1500mm. Each pedestal allows for approximately 15mm-25mm height adjustment.

Performance Selection Chart

Linkfloor HPL/PVC Type Steel Perforated Panel (SPP- BS-PDT)
Item	FFH(mm)	HorizontalLoad(N)	Vertical Load (18KN)	Pedestal Head	Screw Rod	Pedestal Tube	Pedestal Base
BS-PDT 80~150	80~150 +/-15	500	Did Not Collapse	75x75mm Flat Steel	M18 Or M20	/	100x100mm
BS-PDT 200~500	200~500 +/-25	500	Did Not Collapse	75x75mm Flat Steel	M18 Or M20	Dia. 22 or 25mm	100x100mm
BS-PDT 550~800	550~800 +/-25	500	Did Not Collapse	75x75mm Flat Steel	M18 Or M20	Dia. 32mm	100x100mm
BS-PDT 850~1500	850~1500 +/-25	500	Did Not Collapse	75x75mm Flat Steel	M18 Or M20	Dia.38mm	120x120mm

Note: The thickness of the pedestal head and the base range from 2mm to 5mm. We can also customize your orders based on any special requirements.

Stringer is used to improve stability, the rigidity and the bearing capacity of the whole system. There are pre-punched holes at each end of the pedestal head where screws are used to fasten the stringers in place. The stringer is a solid square tube structure that aids in resisting bowing and spreading with greater load impact.

Standard Stringer Dimension:

21mm x 32mm x 570mm

21mm x 32mm x 580mm (available for 24" x24" panel)

Alternative Stringer Dimension:

21mm x 32mm x 1170mm

21mm x 32mm x 1190mm(available for 24" x24" panel)

Thickness: 1.0mm or 1.2mm

Typical areas of application

Steel Perforated elevated floors, blended with Cement Infill panel, is used for the places where air flow is necessary under the floor, such as electrical workshops, cleaning rooms and some special computer rooms.