Encapsulated Calcium Sulphate Raised Floor manufacturer from China Jiangsu Liangfeng Access Floor CO., LTD.

Encapsulated Calcium Sulphate Raised Floor

Place of Origin:

Jiangsu, China (Mainland)


	Add to My Favorites
HiSupplier Escrow	Share \|

Product Detail

Detailed Product Description
Encapsulated Calcium Sulphate Raised Floor is composed of panel

Detailed Product Description

Encapsulated Calcium Sulphate Raised Floor is composed of panels, pedestals and stringers and screws. The stringers and pedestals that are vertically adjustable are connected with screws, which forms the stable bottom bearing . Computer Room Floors are then place on the grid which is formed when connecting the stringers with vinyl trim.

Computer Room Floor description

Access Floor Systems are based on a 600mm x 600mm square module constructed around a high density calcium sulphate core. Both the top and the bottom sheets are covered with galvanized steel sheets that are double folded along the edges to ensure high load bearing capacity and to completely protect the core. As a result, the panels are CE certified and provide excellent rigidity, durability, and acoustic performance.

Encapsulated Calcium sulphate Panel (EP-C)

Panel size: 600mmx600mm

Thickness: 28mm(without top finish)

Top/Bottom finish: Galvanized steel sheet

TECHNICAL SPECIFICATION

General Characteristics
Core material	Wood core	Calcium Sulphate core
Size	600x600±0.3mm
Thickness without covering	28±0.3mm
Panel weight (kg)	9.8±3%	16.5±3%
Density (kg/m³)	720±20	1500±50
Walking sound level at 500Hz	20dB
Fireproof rating	Class A
Fire rating	90 minutes
Size variations after 24 h of immersion into water	0.3%
Max. water absorption	20%
Electrical resistance for non-conductive panels(Ohm)	10⁶-10¹⁰
Loading Capacity (2.5mm deflection)
Concentrated Load (N)	3000	6000
Uniform Load(N/m²)	8000	30000
Ultimate Load (N)	9000	18000
Impact Load(N)	550	780

Understructure

Flat steel head pedestal: The pedestal format is a 90mm diameter head with a base plate measuring 100mm. The head allows for the use of standard plastic cap. There are multiple ways to secure the pedestal to the original floor, including adhesive or bolts. The pedestal head design allows for the use of bolt-on or snap-on stringers if required.

Pedestal Height: 150mm -1500mm. Each pedestal allows for approximately 25mm height adjustment. We can also customize your order based on the special requirements.

Pedestal Structure: Galvanized, or electrophoretic coating

PERFORMANCE SELECTION CHART

Linkfloor Bare/HPL/PVC Type Woodcore Panel & Calcuim Sulphate Panel & Encapsulated (WP/CSP/EP-BS-PDT)
Item	FFH(mm)	Horizontal Load (N)	Vertical Load (18KN)	Pedestal head	Screw Rod	Pedestal Tube	Pedestal Base
BS-PDT 150~500	150~500 +/-25	500	Did Not Collapse	Dia.90mm Flat Steel	M18	Dia. 22 or 25mm	100x100mm
BS-PDT 550~800	550~800 +/-25	500	Did Not Collapse	Dia.90mm Flat Steel	M18	Dia. 32mm	100x100mm
BS-PDT 850~1500	850~1500 +/-25	500	Did Not Collapse	Dia.90mm Flat Steel	M18	Dia. 38mm	120x120mm

Note: The thickness of the pedestal head and the base range from 2mm to 5mm. We can also customize your orders based on any special requirements.

Stringer is used to improve the stability and the rigidity of floor foundation. Each stringer is individually fastened on both ends to the pedestal with screws. It guarantees solid construction and resistance to bowing and spreading with increased load capacity. Each stringer has a vinyl strip attached to its surface so that panel can quietly fitting place.

Bolt-on Stringer

Size: 21mmx30mmx535mm

Thickness: 1.0mm, 1.2mm

Stringer structure: Galvanized, Electrophoretic coating

Snap-on Stringer

Size: 8mmx30mmx535mm

Thickness: 0.6mm, 1.0mm

Stringer structure: Galvanized